What Is the Legal Requirement for Stairs

1910.25(f) Alternating staircase. In addition to clause (b) of this section, the employer shall ensure that stairs are staggered alternately, 1910.25 (f) (1) Have a series of steps installed on a slope of 50 to 70 degrees from the horizontal; RAILINGS open stairs 44″ require 1 ramp and 1 separate handrail / Page 1910.25 (b) (2) The vertical distance above each stair step to an aerial obstacle is at least 6 feet, 8 inches (203 cm), measured from the front edge of the tread. Spiral staircases shall comply with the headroom requirements set out in point (d)(3) of this Section. 1910.25(b) General Requirements. The employer must ensure that: PLATFORMS must be ≥ width of stairs and ≥30″ deep The employer is responsible for the safety of employees on fixed stairs such as roof access stairs, cross stairs, loading ramp stairs, office stairs internal to the plant are all common work stairs. You must follow the rules described below. When it comes to maintaining the productivity of your workplace, there`s nothing more important than safety. That`s why we`ve put together this guide to OSHA stair requirements. This information is useful across industries and helps you determine what is needed to keep your employees safe and your facility productive. Another thing to consider when building or modifying a staircase is the Americans with Disabilities Act. The ADA protects people with disabilities in many aspects of their lives, including ensuring that all buildings are safe and meet acceptable standards. The ADA states that all stairs and stairs must have uniform climbing heights and profile widths.

A section also indicates that stair treads cannot protrude more than 1/2″ beyond the stair riser and must be bent or beveled to prevent falls from a step. The following stair code requirements apply to straight stairs. Spiral stairs and spiral stairs have several different code requirements. ErectaStep`s modular metal stairs and access platforms for industrial maintenance feature modular and lightweight metal staircase components that are both easy to reconfigure and install. One of the components of ErectaStep is the screwing of aluminum ladders. ErectaStep also has a number of commercial stairs with OSHA or IBC compliance options If the stairs have open risers, the open space between the steps may not be large enough to allow a 4-inch ball to pass. In other words, the room should be just under 4 inches high. OSHA`s specific stair requirements, including climb height, tread depth, profile nose, and landings, can be found in this article: OSHA Compliant Stairs: ErectaStep Industrial and Commercial Stairs. You can also read more about the difference between IBC and OSHA security codes here. For more information on OSHA compliance for stairs and walkways, visit the OSHA website. Derogation from paragraphs (c) (2) and (3) of this section.

The requirements of paragraphs (c)(2) and (3) do not apply to standard stairs installed before January 17, 2017. OSHA considers these stairs to be compliant if they meet the dimensional requirements set out in Table D-1 of this section or use a combination that meets the angular requirements of paragraph (c)(1) of this section. The width of the staircase refers to the distance from one side to the other as you go up or down the stairs. According to the IRC, this distance must be at least 36 inches and does not include handrails. 1910.25(b)(7) Standard stairs are used to provide access from one running work surface to another when operation requires regular and routine movement between levels, including access to equipment control platforms. Spiral stairs may be used on tanks and similar round structures if the diameter of the tank or structure is at least 5 feet (1.5 m). Standard staircase means a fixed or permanently installed staircase. Boat stairs, spiral and alternating are not considered standard stairs. If paragraph (b)(8) of this section permits the use of spiral staircases, boats or alternating stairs, they must be installed, operated and maintained in accordance with the manufacturer`s instructions.

All ErectaStep stairs comply with OSHA 1910.25, which covers all stairs, including standard, spiral, boat, and alternating tread stairs. As an employer, it is your responsibility to ensure that all workers have adequate protection against falling objects, including handrails, stair railing systems and guardrail systems, in accordance with OSHA 1910.28. Fixed stairs with four or more risers shall be equipped with stair railings or handrails that comply with section 1917.112(c)(1). The International Residential Code prescribes stairway design requirements that are specific to residential buildings. The stair IRC code indicates that the minimum width of residential stairs is not less than 36 inches to meet stair requirements.